N/A
Standard: £9.95 + VATMembers/Subscribers: Free
Members/Subscribers, log in to access
The Structural Engineer, Volume 68, Issue 4, 1990
Shear in concrete slabs having concentrated loads close to supports In our column for 19 December, Mr R. N. Morgan asked whether other of our readers were aware of published works giving elastic influence coefficients for shear forces in plates due to loads close to supports. We have received a response to Mr Morgan's request from Von Dipl.- Ing. Bjorn Vik of Sandvika in Norway: I believe there are some answers to Mr Morgan’s question about shear in concrete slabs. He mentions Pucher’s book, in which unfortunately the influence fields for shear forces were seriously in error. However, in the book Platten und Behalter, by E. Bittner (Springer-Verlag 1965) several correct influence fields are presented. Also a paper by the writer, in Bauingenieur, 1964/12, deals with shear forces from loads in the vicinity of the support. Verulam
This greatest structural and architectural achievement of the long-lived Byzantine Empire has long inspired awe and presented a challenge to later builders. Its secularisation by Ataturk after almost 1400 years as church and then mosque allowed a precise, detailed survey to be undertaken. This furnished a secure basis for looking behind the early accounts and later legends of its design and construction in search of a fuller understanding. The investigation and the principal conclusions are here outlined, and the paper ends with some comments on the relevance of 6th-century design to current practice. R.J. Mainstone
The ultimate strength of plate girders with perforated webs under shearing and bending is investigated. The girders considered are transversely stiffened panels with aspect ratios (b/d) between 0.7 and 1.5. The holes in the webs are centrally located and they are of circular, rectangular and elongated shapes. The ultimate strength is determined using a theoretical model developed on the basis of stress fields and loading-carrying mechanism observed experimentally from test results and numerically from finite element calculations simplified to allow for the variation in panel and hole size. The predictions obtained from the theory are compared with experimental and numerical results available, and it is found that the theory provides reasonably accurate estimates. M.M.K. Lee