Correspondence on Finite Element Modelling of the Dynamic Characteristics of Tall Buildings by Dr. J
Date published

N/A

Price

Standard: £10 + VAT
Members/Subscribers: Free

The Institution of Structural Engineers The Institution of Structural Engineers
Back to Previous

Correspondence on Finite Element Modelling of the Dynamic Characteristics of Tall Buildings by Dr. J

Tag
Author
Date published
N/A
Price

Standard: £10 + VAT
Members/Subscribers: Free

The Structural Engineer
Citation

The Structural Engineer, Volume 68, Issue 7, 1990

Date published

N/A

Citation

The Structural Engineer, Volume 68, Issue 7, 1990

Price

Standard: £10 + VAT
Members/Subscribers: Free

Mr J. Maguire
(Lloyd's Register)
I have several questions on the paper.
(1) Could the authors advise the measured damping values? Were these obtained from forced vibration or ambient tests?

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Opinion Issue 7

Related Resources & Events

The Structural Engineer
<h4>The Use of an Expert System in Selecting Paint Schemes to Protect Structual Steelwork</h4>

The Use of an Expert System in Selecting Paint Schemes to Protect Structual Steelwork

The task of selecting an economic but effective paint scheme to protect structural steelwork is specialised and requires knowlege outside that of the majority of structural engineers. For many design organisations, the employment of a paint specialist is not practicable, and resource must be had to outside help. R.J. Allwood and C.N. Cooper

Price – £10
The Structural Engineer
<h4>Strength of Cold-Formed Box Columns With Coupled Local and Global Buckling</h4>

Strength of Cold-Formed Box Columns With Coupled Local and Global Buckling

This paper presents a non-linear finite element procedure for the strength determination of cold-formed box columns. The effects of residual stresses, local buckling, and initial imperfections, are all included in the analysis. The proposed theory is validated and its accuracy assessed against experiments conducted at the University of Sydney. A table for the strength of the sections with various member slenderness (L/r) and plate element slenderness (b/t) ratios is also produced, so that the typical relationship between the strength and these two ratios can be understood. The suggested method can be ufiiised to supplement experiments in the generation of design curves and in the parametric studies of the behaviour of cold-formed hollow sections subjected to various types of loading and boundary conditions. S.L. Chan

Price – £9.95
The Structural Engineer
<h4>Media Relations Guide</h4>

Media Relations Guide

Below is published the ‘Media relations guide’ produced by the Public Relations Panel of the Institution. The panel hopes that this will provide useful guidance to those involved with media contact. The panel would welcome comments on the guide and suggestions which might be incorporated in any future revision. Please address these to the Secretary of the Institution. This guide has been written to assist members of the Institution in recognising opportunities for publicity and promotion in the media and to make them more effective in media approaches.

Price – £9.95