Mass timber embodied carbon factors

Author: Tom Place, Clare Perkins and Lucy Caine

Date published

1 December 2021

Price
Free
Back to Previous

Mass timber embodied carbon factors

Tag
Author
Date published
Price
Blog
Author

Tom Place, Clare Perkins and Lucy Caine

Date published

1 December 2021

Author

Tom Place, Clare Perkins and Lucy Caine

Price

Free

Arup has conducted a review of European manufacturers’ CLT and glulam Environmental Product Declarations (EPDs). The review demonstrates that the currently adopted industry average carbon factors for CLT and glulam have reduced when compared with factors from the Inventory of Carbon and Energy database (ICE database).

The currently adopted factors are 0.437 kgCO2e/kg for CLT and 0.512 kgCO2e/kg for glulam, and are referenced by the IStructE's How to calculate embodied carbon guide1 for mass timber. The new figures recommended are 0.25 kgCO2e/kg and 0.28 kgCO2e/kg for CLT and glulam respectively. This is predominantly due to changes in the recorded energy mix and energy use during production.

This article proposes updating the figures referenced by the IStructE to those based on current European manufacturer EPDs.  

The ICE database mass timber carbon factors referenced by the IStructE in How to calculate embodied carbon, are based on a range of international EPDs in addition to data provided by Wood for Good2 nearly a decade ago. Given UK consumption of mass timber broadly reflects the distribution of its manufacture across Europe, Arup decided to conduct a review of current European manufacturer EPDs, to derive suitable, up-to-date factors for CLT and glulam.

A1 – A3 embodied carbon factors were extracted from eleven CLT manufacturer EPDs and eight glulam manufacturer EPDs. Manufacturer data was included and weighted based on production volumes, reflecting the likelihood of a particular product being supplied and limiting the skewing of data by EPDs representing a smaller portion of the market.

The EPDs utilised in this work are third-party independently verified, and have been undertaken in alignment with the requirements of ISO 14025 and EN 15804.

Figures 1 and 2 show current European production volumes from CLT and glulam manufacturers respectively3.
Figures 3 and 4 show the distribution of A1 – A3 embodied carbon factors (excluding sequestration) for CLT and glulam4, as well as the derived weighted average figure calculated by Arup. Average A1 – A3 embodied carbon factors, weighted by production, are 0.25 kgCO2e/kg and 0.28 kgCO2e/kg for CLT and glulam respectively.  

 

"These new carbon factors for CLT and glulam represent an important progression of the knowledge base. It’s encouraging to see that many of the main CLT and glulam manufacturers have published Environmental Product Declarations (EPDS), which provides the embodied carbon of their products. This new research shows the benefit of more suppliers publishing the embodied carbon of their products, giving a welcome reduction in the embodied carbon of CLT and glulam."
Dr Craig Jones, Circular Ecology

 

Figure 1 CLT annual European production

Figure 2 Glulam annual European production

Figure 3 CLT embodied carbon A1-A3 without sequestration

Figure 4 Glulam embodied carbon A1-A3 without sequestration


 

Figures 5 and 6 below show the mixture of renewable and non-renewable primary energy quoted by each manufacturer (including renewable energy from burning waste wood on-site). The ICE database does not provide an energy breakdown with its carbon factors. However, the Wood for Good (2013) EPDs, which formed part of the ICE database study and represented a 2013 UK industry average, has been used to give an indicative energy mix for the study period. Several observations can be made:

  • Less energy is typically used by each manufacturer to produce 1m3 of mass timber compared to the Wood for Good analysis
  • Less non-renewable energy is typically used by each manufacturer to produce 1m3 of mass timber compared to the Wood for Good analysis
  • The A1-A3 embodied carbon factors correlate to the non-renewable energy component quoted by each manufacturer

Based on industry engagement, primary contributing factors also include varying transport distances during production, the energy mix of the country of manufacture and the utilisation of the factories studied.

It is also useful to compare the new embodied carbon factors derived to the value for conventional sawn and dried softwood timber.

The softwood value given in the ICE database and the IStructE guide is 0.263 kgCO2e/kg – very similar to the new values for CLT and glulam proposed. A review of current EPD data from Europe’s largest sawn and dried softwood timber producers suggests that this value may also warrant reduction, and further work by the industry in this space is suggested.
 

Figure 5 CLT primary energy use of production (A1-A3)


Figure 6 Glulam primary energy use of production (A1-A3)

Conclusion

It was found that current European mass timber EPDs give lower carbon values than those derived previously by the ICE database. The EPD data utilised in this study is more recent than data utilised for the existing carbon factors and covers approximately 85% of the volume of CLT and 50% of the volume of glulam produced in Europe. Our recommendation is that new weighted average values are adopted for CLT and glulam structures being constructed across Europe, including in the UK.

In addition, the following further work is proposed:

  • Development of up-to-date embodied carbon factors for European sawn and dried softwood, hardwood, plywood, oriented strand board and laminated veneer lumber
  • Development of timber factors for other global regions
  • Refinement of assumptions around transport routes via road and sea, to capture the increasing influence of stage A4 as earlier production stage factors reduce
  • Further review of lifecycle stages B – D to understand the current whole lifecycle carbon factors for mass timber products

The authors of How to calculate embodied carbon have confirmed that these figures will be included in the next revision of the guide, due for publication in Spring 2022.
 

References


[1] The Institution of Structural Engineers (2020). How to calculate embodied carbon

[2] Jones, C. and Hammon, G. (2019). ICE (Inventory of Carbon & Energy) Database Version 3.0. Circular Ecology and University of Bath. Available at: https://circularecology.com/embodied-carbon-footprint-database.html

[3] Production Volumes
Construction.co.uk. Moelven Laminated Timber Structures
Holzkurier. Expresslieferung in den Norden
Rubner Holzbau. Our strategy. Wood experts
Setra. Långshyttan - Setra's new wood industry hub
Splitkon. Massivtre fra Splitkon
Timber Online. Eight new CLT production sites by 2023
Timber Online. Over 3 million m3 for the first time – record years for glulam
Timber Online. The biggest CLT producers in Central Europe
Versowood. Puureferenssit. References

[4] Environmental Product Declarations
CLT EPDs: EPD-BBS-20190021-IBB1-EN, EPD­HAS­20210172­IBD1­EN, EPD-KLH-20190027-ICA1-EN, EPD-SHL-20180035-IBG1-EN, EPD-SLH-20200098-IBC1-DE, NEPD-2042-902-NO, S-P-01408, S-P-02033.
Glulam EPDs: EPD-BBS-20190164-IBA1-EN, EPD­HAS­20210171­IBD1­EN, EPD-RUB-20180058-IBB1-EN, EPD-SHL-20120017-IBG1-EN, NEPD-1662-655-EN, NEPD-456-318-EN.

Wood for Good life cycle assessments
Wood for Good. Glued Laminated Timber
Wood for Good. Cross Laminated Timber
Manufacturers were contacted directly where production volumes and/or EPDs were unavailable online. All references accessed November 2021.

[5] Codes and Standards
BS EN ISO 14025:2010 Environmental labels and declarations – Type III environmental declarations – Principles and procedures London: BSI, 2010
BS EN 15804:2019 Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products. London: BSI, 2019.
 

Related Resources & Events

Course
Historic timber structures

Historic timber structures: assessment and reuse

This one-day online course introduces timber as an engineering material, with a focus on its use in historic structures. It covers non-destructive techniques for condition assessment and strategies for the reuse of heritage structures.

Date ‐ 16 November 2023
Location ‐ The Institution of Structural Engineers HQ
Price ‐ £275 - £425 + VAT
Course
A bridge over a dry river bed

Net-zero structural design

This course is designed to enable you to design structures with net zero emissions. Delivered as a series of interactive online sessions across five weeks.

Date ‐ 9 November 2023
Location ‐ Online
Price ‐ £485 - £745 + VAT
Course
<h4>Structural engineering for non-structural engineers</h4>

Structural engineering for non-structural engineers

This one-day, online course is designed to offer an understanding of structural engineering in relation to buildings to construction industry professionals.

Date ‐ 20 September 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
A bridge over a dry river bed

Net-zero structural design

This course is designed to enable you to design structures with net zero emissions. Delivered as a series of interactive online sessions across five weeks.

Date ‐ 7 September 2023
Location ‐ Online
Price ‐ £485 - £745 + VAT
Course
<h4>Timber workshop: design through worked examples</h4>

Timber workshop: design through worked examples

This one-day, online advanced practical workshop will teach complex timber engineering through worked examples. It encourages problem-solving through teaching tools and group discussion.

Date ‐ 12 July 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
Amesbury School detail

Eurocode 5: the essentials of timber design

This one-day, online course offers an introduction to timber design to Eurocode 5.

Date ‐ 11 July 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
wood and timber connection

Eurocode 5: connections and advanced topics in timber design

This one-day, online, practical course introduces timber connections in detail and several other advanced topics in timber design to Eurocode 5.

Date ‐ 16 June 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
Amesbury School detail

Eurocode 5: the essentials of timber design

This one-day, online course offers an introduction to timber design to Eurocode 5.

Date ‐ 15 June 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
TallWood House at Brock Commons interior

Vibration serviceability of building floors

The current demand for many floors is open plan, slender and lightweight. As such, vibration and not strength govern their design. This course will equip engineers to appreciate state-of-the-art vibration serviceability design and assessment for low-frequency, high-frequency floors, cross-laminated timber and other lightweight floors and best practice in testing and mitigation.

Date ‐ 14 June 2023
Location ‐ The Institution of Structural Engineers
Price ‐ £275 - £425 + VAT
Course
A bridge over a dry river bed

Net-zero structural design

This course is designed to enable you to design structures with net zero emissions. Delivered as a series of interactive online sessions across five weeks.

Date ‐ 20 April 2023
Location ‐ Online
Price ‐ £485 - £745 + VAT
Conference
A man uses virtual reality with bridge in background

Designing for the future, now – e-conference

Join industry leaders and explore the factors driving change in structural engineering: society and technology; process and materials; regulatory and legislative. This e-conference will help you keep your business creative, profitable, and sustainable in a rapidly changing world.

Date ‐ 29 March 2023
Location ‐ Online
Price ‐ £25 - £285 + VAT
Conference
<h4>Modern solutions for repairing, strengthening and waterproofing concrete (sponsored content)</h4>

Modern solutions for repairing, strengthening and waterproofing concrete (sponsored content)

This sponsored in-person briefing by Mapei will focus on the principles and practices of structural below-ground waterproofing, and it will cover best practices for good quality assurance and monitoring of workmanship on site.

Date ‐ 22 March 2023
Location ‐ The Institution of Structural Engineers
Price ‐ Free
Course
<h4>Historic timber structures: assessment and reuse</h4>

Historic timber structures: assessment and reuse

This one-day online course introduces timber as an engineering material, with a focus on its use in historic structures. It covers non-destructive techniques for condition assessment and strategies for the reuse of heritage structures.

Date ‐ 2 February 2023
Location ‐ Online
Price ‐ £275 - £425 + VAT
Course
A bridge over a dry river bed

Net-zero structural design

This course is designed to enable you to design structures with net zero emissions. Delivered as a series of interactive online sessions across five weeks.

Date ‐ 2 February 2023
Location ‐ Online
Price ‐ £485 - £745 + VAT
Guidance
<h4>Circular economy and reuse: guidance for designers</h4>

Circular economy and reuse: guidance for designers

This new guidance is an essential read for any built environment professional developing new (or reusing existing) structures today. Across four principal sections it explains why the adoption of circular economy principles is critical.

Date ‐ 1 February 2023
Author ‐ P Gowler et al
Price ‐ £32.50