N/A
Standard: £10 + VATMembers/Subscribers: Free
Members/Subscribers, log in to access
The Structural Engineer, Volume 64, Issue 16, 1986
In structural testing, it is important to ensure that the loading that is applied to the test piece is that which is intended. If unintended constraints or instabilities arise, these will often lead to errors. The paper proposes a method of assessing the kinematic state of a test setup and enables suitable systems to be designed. R.C. Corless and Professor P.B. Morice
Eleven bamboo-reinforced concrete two-way slabs with simply supported boundaries have been subjected to concentrated central loading. Concrete strength, span/depth ratio, bamboo percentage, and the treatment given to the bamboo reinforcement, were varied. Punching failure always followed the full development of the flexural collapse mechanism, and the punching load was always greater than the yieldline theory load. From a consideration of the results, methods of predicting both the cracking load and the punching load of a bamboo reinforced slab are suggested. J.A. Kankam, M. Ben-George and Professor S.H. Perry
Tests were carried out to investigate the behaviour of two tall, narrow diaphragm walls under varying levels of prestrm and subject to varying magnitudes of lateral loading. The main and primary objective was to evaluate the massive increase in lateral load resistance of such walls, of well over a 100 times, compared to traditional walls of similar cross-sectional area. A number of secondary objectives such as creep, elastic contraction, princbal tensile strength, shear lag, and the general behaviour of full-scale plain diaphragm walls, were also examined. It was found that prestressing not only immensely increases brickwork’s bending strength; it also increases the stiffness of elements and changes brickwork behaviour from brittle to ductile. It may not be an exaggeration to state that it is a ’new’ structural material and bears no comparison, structurally, with traditional brickwork. W.G. Curtin